Wednesday, September 1, 2010

diy ottoman

Gratuitous living room pics, coming right up :)

As you may or may not remember, I recently revealed my new and improved living room. [I'll stop bragging in a minute or two, don't you worry.] For the record, I have loved every single corner of this room. While I've waited for my office to be finished, I've been working from our dining room table, facing the living room. And I smile.all.day because it's just so happy. I lovelovelove it. Is it okay to be this mushy, gushy over something you did? Is that arrogant? I sure hope not, because I can't stop :)

Anywhoey, when I first posted those pics, a few peeps wanted to know how I constructed the ottoman/coffee table. Allow me to demonstrate...

Supplies
  • Wood for the top, cut to desired size. I used MDF and it's 35x35.
  • Legs: I scored some scrap banisters from the Habitat Store and we cut them down to size. And by that, I mean The Boy cut them down to size. I read somewhere that the top of your coffee table should be slightly shorter than the seat of your couch [2 inches shorter, maybe?] so we followed that rule when measuring.
  • L-brackets
  • Foam
  • Fabric
  • STAPLE GUN!!
Position the foam on top of the wood and cover with fabric - pull it super, duper tight and staple it along the bottom side. Paint your legs and once they're dry, you're ready to attach them to the top. We had square legs and on all four sides of each leg, attached an L-bracket. Then you can screw the L-bracket into the bottom of the tabletop to attach the legs. I need to paint over the brackets, so they don't stand out as much, but that's for another day.

Does that make sense? Probably not, but it might make sense once you get it all laid out. I hope so, because I didn't take pics of that part :)


See? Isn't it pretty? And that cutie little tray is DIY, too. Remember this creepy little guy?

Well, he's broken. When I was taking him out to burn him, the frame shattered. Probably because it was framed in 1978 and fragile. So I robbed an old poster of its frame and did what I set out to do in the first place. Just paint the frame, frame a piece of fabric and you're done, sir, done!

And what did I do with our original coffee table, you ask?

It's greeting guests in our foyer, thanks to a World Market run. I'm not sure how I feel about those pillows just yet, but go with it. Maybe I'll cover them with (sshhh!!) Fall fabric :)

5 comments:

  1. No!!! Don't cover the pillows! That pattern is AWESOME! Unique! Amazing! keep it!

    The ottoman is crazy good. I love it!

    ReplyDelete
  2. Very pretty. Love the ottoman, and the pillows and the tray, and all of it! Great job. Thanks for sharing.

    ReplyDelete
  3. Page, I LOVE the entryway bench! I know fall fabric would be fun, but this is cool too. What about getting seasonal pillows to switch out every few months?

    Also, when we constructed our headboard, we used spray adhesive to attach the foam to the board. I don't know why, I may have read it somewhere. Just thought I'd share that tidbit for other ottoman makers...

    Thanks for sharing!

    ReplyDelete
  4. great tutorial.

    come link it up with us, so our readers can find you and your projects too:

    http://www.finecraftguild.com/diy-tutorial-linky-party-13/

    every wednesday a new craft tutorial linking party, that stays open all week.

    ReplyDelete
  5. Great ideas! I am just finishing up an ottoman myself. Hope it turns out as lovely as yours :) Thanks for joining in on the first Thrilling Thursday linky party @ Paisley Passions. I hope you will join in again next week :)

    ~Lori

    ReplyDelete

I love reading what you have to say! Thanks for taking the time to say it :)

Related Posts with Thumbnails